V0.0.0 Is redy for rewiev, dimentions : 20x20mm module / mounting pins 17x17mm

00_hardware/arnie48.kicad_prl

@@ -1,6 +1,6 @@
 {
   "board": {
-    "active_layer": 44,
+    "active_layer": 47,
     "active_layer_preset": "",
     "auto_track_width": true,
     "hidden_netclasses": [],
@@ -15,17 +15,17 @@
       "zones": 0.6
     },
     "selection_filter": {
-      "dimensions": true,
+      "dimensions": false,
-      "footprints": true,
+      "footprints": false,
-      "graphics": true,
+      "graphics": false,
-      "keepouts": true,
+      "keepouts": false,
       "lockedItems": false,
-      "otherItems": true,
+      "otherItems": false,
-      "pads": true,
+      "pads": false,
       "text": true,
-      "tracks": true,
+      "tracks": false,
-      "vias": true,
+      "vias": false,
-      "zones": true
+      "zones": false
     },
     "visible_items": [
       0,
@@ -64,7 +64,7 @@
       39,
       40
     ],
-    "visible_layers": "0009020_80000001",
+    "visible_layers": "0000020_00000001",
     "zone_display_mode": 0
   },
   "git": {

00_hardware/arnie48.kicad_pro

@@ -48,10 +48,16 @@
         "silk_text_thickness": 0.1,
         "silk_text_upright": false,
         "zones": {
-          "min_clearance": 0.5
+          "min_clearance": 0.125
         }
       },
-      "diff_pair_dimensions": [],
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
       "drc_exclusions": [],
       "meta": {
         "version": 2
@@ -83,7 +89,7 @@
         "lib_footprint_mismatch": "warning",
         "malformed_courtyard": "error",
         "microvia_drill_out_of_range": "error",
-        "missing_courtyard": "ignore",
+        "missing_courtyard": "error",
         "missing_footprint": "warning",
         "net_conflict": "warning",
         "npth_inside_courtyard": "ignore",
@@ -94,7 +100,7 @@
         "silk_over_copper": "warning",
         "silk_overlap": "warning",
         "skew_out_of_range": "error",
-        "solder_mask_bridge": "error",
+        "solder_mask_bridge": "warning",
         "starved_thermal": "error",
         "text_height": "warning",
         "text_thickness": "warning",
@@ -110,21 +116,21 @@
       },
       "rules": {
         "max_error": 0.005,
-        "min_clearance": 0.0,
+        "min_clearance": 0.125,
-        "min_connection": 0.0,
+        "min_connection": 0.125,
-        "min_copper_edge_clearance": 0.5,
+        "min_copper_edge_clearance": 0.3,
-        "min_hole_clearance": 0.25,
+        "min_hole_clearance": 0.254,
-        "min_hole_to_hole": 0.25,
+        "min_hole_to_hole": 0.254,
-        "min_microvia_diameter": 0.2,
+        "min_microvia_diameter": 0.45,
-        "min_microvia_drill": 0.1,
+        "min_microvia_drill": 0.3,
         "min_resolved_spokes": 2,
         "min_silk_clearance": 0.0,
-        "min_text_height": 0.8,
+        "min_text_height": 1.0,
-        "min_text_thickness": 0.08,
+        "min_text_thickness": 0.15,
         "min_through_hole_diameter": 0.3,
-        "min_track_width": 0.0,
+        "min_track_width": 0.09,
-        "min_via_annular_width": 0.1,
+        "min_via_annular_width": 0.075,
-        "min_via_diameter": 0.5,
+        "min_via_diameter": 0.45,
         "solder_mask_to_copper_clearance": 0.0,
         "use_height_for_length_calcs": true
       },
@@ -171,7 +177,14 @@
           "td_width_to_size_filter_ratio": 0.9
         }
       ],
-      "track_widths": [],
+      "track_widths": [
+        0.0,
+        0.1,
+        0.125,
+        0.15,
+        0.2,
+        0.32
+      ],
       "tuning_pattern_settings": {
         "diff_pair_defaults": {
           "corner_radius_percentage": 80,
@@ -198,7 +211,28 @@
           "spacing": 0.6
         }
       },
-      "via_dimensions": [],
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        },
+        {
+          "diameter": 0.3,
+          "drill": 0.45
+        },
+        {
+          "diameter": 0.3,
+          "drill": 0.45
+        },
+        {
+          "diameter": 0.3,
+          "drill": 0.45
+        },
+        {
+          "diameter": 0.3,
+          "drill": 0.45
+        }
+      ],
       "zones_allow_external_fillets": false
     },
     "ipc2581": {

jlc_rules.txt

@@ -0,0 +1,102 @@
+(version 1)
+#Kicad 7
+
+# 2-layer, 1oz copper
+(rule "Minimum Trace Width (outer layer)"
+	(constraint track_width (min 5mil))
+	(layer outer)
+	(condition "A.Type == 'track'"))
+
+(rule "Minimum Trace Spacing (outer layer)"
+	(constraint clearance (min 5mil))
+	(layer outer)
+	(condition "A.Type == 'track' && B.Type == A.Type"))
+
+# 4-layer
+(rule "Minimum Trace Width and Spacing (inner layer)"
+	(constraint track_width (min 3.5mil))
+	(layer inner)
+	(condition "A.Type == 'track'"))
+
+(rule "Minimum Trace Spacing (inner layer)"
+	(constraint clearance (min 3.5mil))
+	(layer inner)
+	(condition "A.Type == 'track' && B.Type == A.Type"))
+
+# silkscreen (Kicad 7 only)
+(rule "Minimum Text"
+	(constraint text_thickness (min 0.15mm))
+	(constraint text_height (min 1mm))
+	(layer "?.Silkscreen"))
+
+(rule "Pad to Silkscreen"
+	(constraint silk_clearance (min 0.15mm))
+	(layer outer)
+	(condition "A.Type == 'pad' && (B.Type == 'text' || B.Type == 'graphic')"))
+
+# edge clearance
+(rule "Trace to Outline"
+	(constraint edge_clearance (min 0.3mm))
+	(condition "A.Type == 'track'"))
+
+# This would override board outline and milled areas
+#(rule "Trace to V-Cut"
+#	(constraint clearance (min 0.4mm))
+#	(condition "A.Type == 'track' && B.Layer == 'Edge.Cuts'"))
+
+# drill/hole size
+(rule "drill hole size (mechanical)"
+	(constraint hole_size (min 0.2mm) (max 6.3mm)))
+
+(rule "Minimum Via Hole Size"
+	(constraint hole_size (min 0.2mm))
+	(condition "A.Type == 'via'"))
+
+(rule "Minimum Via Diameter"
+	(constraint via_diameter (min 0.45mm))
+	(condition "A.Type == 'via'"))
+
+(rule "PTH Hole Size"
+	(constraint hole_size (min 0.2mm) (max 6.35mm))
+	(condition "A.isPlated()"))
+
+(rule "Minimum Non-plated Hole Size"
+	(constraint hole_size (min 0.5mm))
+	(condition "A.Type == 'pad' && !A.isPlated()"))
+	
+(rule "Minimum Castellated Hole Size"
+	(constraint hole_size (min 0.6mm))
+	(condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'"))
+
+# clearance
+(rule "hole to hole clearance (different nets)"
+	(constraint hole_to_hole (min 0.5mm))
+	(condition "A.Net != B.Net"))
+
+(rule "via to track clearance"
+	(constraint hole_clearance (min 0.254mm))
+	(condition "A.Type == 'via' && B.Type == 'track'"))
+
+(rule "via to via clearance (same nets)"
+	(constraint hole_to_hole (min 0.254mm))
+	(condition "A.Type == 'via' && B.Type == A.Type && A.Net == B.Net"))
+
+(rule "pad to pad clearance (with hole, different nets)"
+	(constraint hole_to_hole (min 0.5mm))
+	(condition "A.Type == 'pad' && B.Type == A.Type && A.Net != B.Net"))
+
+(rule "pad to pad clearance (without hole, different nets)"
+	(constraint clearance (min 0.127mm))
+	(condition "A.Type == 'pad' && B.Type == A.Type && A.Net != B.Net"))
+
+(rule "NPTH to Track clearance)"
+	(constraint hole_clearance (min 0.254mm))
+	(condition "A.Pad_Type == 'NPTH, mechanical' && B.Type == 'track'"))
+
+(rule "PTH to Track clearance)"
+	(constraint hole_clearance (min 0.33mm))
+	(condition "A.isPlated() && B.Type == 'track'"))
+
+(rule "Pad to Track clearance)"
+	(constraint clearance (min 0.2mm))
+	(condition "A.isPlated() && B.Type == 'track'"))