maplifer v2

amplifier_box.scad

@@ -1,8 +1,16 @@
 
 include <library/box.scad>
 include <MCAD-master/materials.scad>
-$fn = 100;
+$fn = 50;
 
+    va = 0.02; 
+    van = -(va/2);
+    vap = +(va/2);
+
+    m3_hole = 3.2; 
+    m3_thread = 2.5;
+    m3_head_height = 3.5; 
+    m3_head_dia = 6;
 
     radiator_base_lenght = 84; 
     radiator_base_width = 64; 
@@ -10,9 +18,9 @@ $fn = 100;
     radiator_copper_lenght = 44; 
     radiator_copper_height = 6; 
     radiator_top_height = 31;
-    radiator_full_height = 31;
+    radiator_full_height = 31 + radiator_base_height;
     radiator_full_width = 80;
-    radiator_total_height = radiator_full_height + radiator_copper_height;
+    radiator_total_height = radiator_full_height + radiator_copper_height ;
 
     radiator_base_offset_x = 0;
     radiator_base_offset_y = (radiator_full_width - radiator_base_width)/2; 
@@ -40,6 +48,16 @@ $fn = 100;
     n12_firstHoleDia = 19;
     n12_fisrtHoleDepth = 24; 
 
+
+    neutrik_xlr_front_dia = 22; 
+    neutrik_xlr_front_depth = 2.7 + 1; 
+    neutrik_xlr_rear_depth = 19.5; 
+    neutrik_xlr_srew_holder_dia = 5;
+    neutrik_xlr_srew_holder_depth = 6.5; 
+    neutrik_xlr_srew_holder_depth_offset =-neutrik_xlr_srew_holder_depth;
+    neutrik_xlr_srew_sapcing = 19.8;
+    neutrik_xlr_support_width = 10;
+    neutrik_xlr_support_offset_y = 1.5;
     mounting_base_dia = 10;
     mounting_base_height = 2;
     mounting_base_lenght = 5;
@@ -47,44 +65,69 @@ $fn = 100;
     mounting_col_clearance = 0; 
     mounting_col_height = nl2_mountHeight + mounting_col_clearance ; 
     mounting_col_dia = 7;
-    mounting_col_screw_dia = 2.8; 
     mounting_col_screw_depth = 6; 
     mounting_col_screw_offset = mounting_col_height - mounting_col_screw_depth;
 
-
+    amplifier_pcb_cable_sapce = 15; 
-    amplifier_pcb_cable_sapce = 20; 
 
     amplifier_base_height = 3; 
+    amplifier_lid_height = 3; 
 
+    lid_radiator_tollerance = 0.5;
     amplifier_side_wall_thickness = 3;
 
-    amplifier_pcb_lenght = 130; 
+    assembly_cube_wall_thickness = 2;
-    amplifier_pcb_width = 70; 
+
+    amplifier_base_mounting_screw_offset = (amplifier_side_wall_thickness + assembly_cube_wall_thickness) + m3_hole/2;
+    amplifier_wall_mount_width = 2*assembly_cube_wall_thickness + m3_thread;
+    amplifier_wall_screw_offset = amplifier_wall_mount_width / 2;
+    amplifier_wall_screw_separation = 2;
+    amplifier_wall_srcew_1_z = mounting_col_screw_depth + amplifier_wall_screw_separation + m3_thread/2;
+    amplifier_wall_srcew_2_z = amplifier_wall_srcew_1_z + amplifier_wall_screw_separation + m3_thread;
+    amplifier_wall_height = 66;
+
+    amplifier_base_foot_height = 10 ; 
+    amplifier_base_foot_bot_width = amplifier_side_wall_thickness + amplifier_wall_mount_width;
+    amplifier_base_foot_top_width = 8; 
+
+    amplifier_pcb_lenght = 130;
+    amplifier_pcb_width = 70;
     amplifier_pcb_height = 2;
-    amplifier_pcb_srew_sapcing_x = 120; 
+    amplifier_pcb_srew_sapcing_x = 120;
-    amplifier_pcb_srew_sapcing_y = 60; 
+    amplifier_pcb_srew_sapcing_y = 60;
-    amplifier_pcb_srew_offset_x = 5; 
+    amplifier_pcb_srew_offset_x = 5;
     amplifier_pcb_srew_offset_y = 4;
-    amplifier_mounting_srew_offset_x = mounting_base_dia/2 + amplifier_side_wall_thickness + amplifier_pcb_cable_sapce; 
+    amplifier_mounting_srew_offset_x = amplifier_side_wall_thickness + amplifier_pcb_cable_sapce + amplifier_pcb_srew_offset_x;
-    amplifier_mounting_srew_offset_y = mounting_base_dia/2 + amplifier_side_wall_thickness + radiator_total_height ;
+    amplifier_mounting_srew_offset_y = amplifier_side_wall_thickness + radiator_total_height + amplifier_pcb_srew_offset_y - m3_hole;
     
-    amplifier_base_lenght = 2*amplifier_side_wall_thickness + 2*amplifier_pcb_cable_sapce + amplifier_pcb_srew_sapcing_x; 
+    amplifier_base_lenght = 2*amplifier_side_wall_thickness + 2*amplifier_pcb_cable_sapce + amplifier_pcb_lenght; 
-    amplifier_base_width = 2*amplifier_side_wall_thickness + amplifier_pcb_cable_sapce + amplifier_pcb_srew_sapcing_y+radiator_total_height;
+    amplifier_base_width = 2*amplifier_side_wall_thickness + amplifier_pcb_cable_sapce + amplifier_pcb_width + radiator_total_height;
-
 
     pos_opamp_from_frist_mounting_hole_x = 80 + amplifier_mounting_srew_offset_x + radiator_base_width / 2 ;
     pos_opamp_from_frist_mounting_hole_y = amplifier_mounting_srew_offset_y ;
 
-    m3_hole = 3.1; 
+    amplifier_base_radiator_mount_height = 10; 
-    m3_thread = 2.8;
+    amplifier_base_raditor_base_offset_x = (pos_opamp_from_frist_mounting_hole_x - radiator_base_width) + (radiator_full_width-radiator_base_width)/2 ;
-    
+    amplifier_base_raditor_base_offset_y = radiator_full_height - radiator_base_height;
+    amplifier_base_raditor_wall_hole_offset_x = amplifier_base_mounting_screw_offset + 60; 
+
+    radiator_base_support_thread_offset = 5;
+    radiator_base_support_hole_x = radiator_base_width/2;
+    radiator_base_support_middle_width = radiator_base_height/2;
+    radiator_base_support_thread_1_x = radiator_base_support_thread_offset;  
+    radiator_base_support_thread_2_x = radiator_base_width - radiator_base_support_thread_offset;  
 
-//amplifier_full();
-//translate([20,amplifier_base_width,amplifier_base_height+nl2_mountHeight/2])rotate([90,0,180])neutrik_nl2(); 
-srewHolder();
 
 
+//translate([0,0,amplifier_base_foot_height])amplifier_full();
 
+//amplifer_base();
+radiator_base_support(amplifier_base_radiator_mount_height, m3_thread);
+//amplifer_lid(); 
+//amplifierWallMount(); 
+//amplifier_base_foot(); 
+//radiator(); 
+//amplifierPcb(); 
 
 module amplifierPcb()
 {
@@ -105,14 +148,14 @@ module amplifierPcb()
     difference()
     {
         color("green")cube(size = [amplifier_pcb_lenght,amplifier_pcb_width,amplifier_pcb_height]);
-        translate([amplifier_pcb_srew_offset_x,amplifier_pcb_srew_offset_y,0])
+        translate([amplifier_pcb_srew_offset_x,amplifier_pcb_srew_offset_y,van])
-            cylinder(d=m3_hole,h=amplifier_pcb_height);
+            cylinder(d=m3_hole,h=amplifier_pcb_height+va);
-        translate([amplifier_pcb_srew_offset_x + amplifier_pcb_srew_sapcing_x ,amplifier_pcb_srew_offset_y,0])
+        translate([amplifier_pcb_srew_offset_x + amplifier_pcb_srew_sapcing_x ,amplifier_pcb_srew_offset_y,van])
-            cylinder(d=m3_hole,h=amplifier_pcb_height);
+            cylinder(d=m3_hole,h=amplifier_pcb_height+va);
-        translate([amplifier_pcb_srew_offset_x,amplifier_pcb_srew_offset_y + amplifier_pcb_srew_sapcing_y,0])
+        translate([amplifier_pcb_srew_offset_x,amplifier_pcb_srew_offset_y + amplifier_pcb_srew_sapcing_y,van])
-            cylinder(d=m3_hole,h=amplifier_pcb_height);
+            cylinder(d=m3_hole,h=amplifier_pcb_height+va);
-        translate([amplifier_pcb_srew_offset_x + amplifier_pcb_srew_sapcing_x,amplifier_pcb_srew_offset_y + amplifier_pcb_srew_sapcing_y,0])
+        translate([amplifier_pcb_srew_offset_x + amplifier_pcb_srew_sapcing_x,amplifier_pcb_srew_offset_y + amplifier_pcb_srew_sapcing_y,van])
-            cylinder(d=m3_hole,h=amplifier_pcb_height);
+            cylinder(d=m3_hole,h=amplifier_pcb_height+va);
     }
     
     color("blue")
@@ -125,30 +168,155 @@ module amplifierPcb()
             difference()
             {
                 cube(size = [opamp_lenght,opamp_width,opamp_height]);
-                translate([opamp_lenght/2,opamp_width,opamp_mounting_hole_from_top])
+                translate([opamp_lenght/2,opamp_width+vap,opamp_mounting_hole_from_top])
                     rotate([90,0,0])
-                        cylinder(d=opamp_mounting_hole_dia,h=opamp_width);
+                        cylinder(d=opamp_mounting_hole_dia,h=opamp_width+va);
             }
     
 }
 
+module amplifierWallMount()
+{
+    difference()
+    {
+        cube(size = [amplifier_wall_mount_width,amplifier_wall_mount_width,amplifier_wall_height]); 
+
+        translate([amplifier_wall_screw_offset,amplifier_wall_screw_offset,0])
+            cylinder(d=m3_thread,h=mounting_col_screw_depth); 
+                translate([amplifier_wall_screw_offset,amplifier_wall_screw_offset,van])
+                    cylinder(d=m3_thread,h=va); 
+
+        translate([amplifier_wall_screw_offset,amplifier_wall_screw_offset,amplifier_wall_height - mounting_col_screw_depth])
+            cylinder(d=m3_thread,h=mounting_col_screw_depth);
+                translate([amplifier_wall_screw_offset,amplifier_wall_screw_offset,amplifier_wall_height + van])
+                    cylinder(d=m3_thread,h=va); 
+
+        translate([amplifier_wall_screw_offset,amplifier_wall_mount_width+vap,amplifier_wall_srcew_1_z])
+            rotate([90,0,0])
+                cylinder(d=m3_thread,h=amplifier_wall_mount_width+va);
+
+        translate([amplifier_wall_screw_offset,amplifier_wall_mount_width+vap,amplifier_wall_height - amplifier_wall_srcew_1_z])
+            rotate([90,0,0])
+                cylinder(d=m3_thread,h=amplifier_wall_mount_width+va);
+        
+        translate([van,amplifier_wall_screw_offset,amplifier_wall_srcew_2_z])
+            rotate([0,90,0])
+                cylinder(d=m3_thread,h=amplifier_wall_mount_width+va); 
+
+        translate([van,amplifier_wall_screw_offset,amplifier_wall_height - amplifier_wall_srcew_2_z])
+            rotate([0,90,0])
+                cylinder(d=m3_thread,h=amplifier_wall_mount_width+va); 
+    }
+} 
+
+
 module amplifer_base()
 {
-    cube(size = [amplifier_base_lenght,amplifier_base_width,amplifier_base_height]);
+    difference()
-    translate([amplifier_mounting_srew_offset_x, amplifier_mounting_srew_offset_y, amplifier_base_height])
+    {
-        srewHolder();
+        cube(size = [amplifier_base_lenght,amplifier_base_width,amplifier_base_height]);
-    translate([amplifier_mounting_srew_offset_x + amplifier_pcb_srew_sapcing_x , amplifier_mounting_srew_offset_y, amplifier_base_height])
+        translate([amplifier_mounting_srew_offset_x, amplifier_mounting_srew_offset_y, van])
-        srewHolder();
+            cylinder(d= m3_hole ,h=amplifier_base_height+ va);
-    translate([amplifier_mounting_srew_offset_x, amplifier_mounting_srew_offset_y + amplifier_pcb_srew_sapcing_y , amplifier_base_height])
+        translate([amplifier_mounting_srew_offset_x + amplifier_pcb_srew_sapcing_x , amplifier_mounting_srew_offset_y, van])
-        srewHolder();
+            cylinder(d= m3_hole ,h=amplifier_base_height+ va);
-    translate([amplifier_mounting_srew_offset_x + amplifier_pcb_srew_sapcing_x, amplifier_mounting_srew_offset_y + amplifier_pcb_srew_sapcing_y, amplifier_base_height])
+        translate([amplifier_mounting_srew_offset_x, amplifier_mounting_srew_offset_y + amplifier_pcb_srew_sapcing_y , van])
-        srewHolder();
+            cylinder(d= m3_hole ,h=amplifier_base_height+ va);
+        translate([amplifier_mounting_srew_offset_x + amplifier_pcb_srew_sapcing_x, amplifier_mounting_srew_offset_y + amplifier_pcb_srew_sapcing_y, van])
+            cylinder(d= m3_hole ,h=amplifier_base_height+ va);
+
+        translate([amplifier_base_mounting_screw_offset, amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_base_height+ va);
+        translate([amplifier_base_mounting_screw_offset, amplifier_base_width - amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_base_height+ va);
+        translate([amplifier_base_lenght - amplifier_base_mounting_screw_offset, amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_base_height+ va);
+        translate([amplifier_base_lenght - amplifier_base_mounting_screw_offset, amplifier_base_width - amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_base_height+ va);
+
+        translate([amplifier_base_raditor_wall_hole_offset_x, amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_base_height+va);
+        
+        translate([pos_opamp_from_frist_mounting_hole_x - radiator_base_width ,radiator_total_height ,amplifier_base_height + va])
+            rotate([90,90,0])
+                radiator();
+    }
+
+  
+        translate([amplifier_base_raditor_base_offset_x,amplifier_base_raditor_base_offset_y,0])
+           radiator_base_support(amplifier_base_height,m3_hole); 
+    
 }
 
-module srewHolder()
+
+//translate([amplifier_base_raditor_base_offset_x,amplifier_base_raditor_base_offset_y,amplifier_base_height])
+//radiator_base_support();
+module radiator_base_support(height = 1, srew_hole_size = 1)
+{
+    difference()
+    {
+        cube(size = [radiator_base_width,radiator_base_height,height]);
+        
+        translate([radiator_base_support_hole_x,radiator_base_support_middle_width,van])
+            cylinder(d=3.2 ,h=height + va);
+
+        translate([radiator_base_support_thread_1_x,radiator_base_support_middle_width,van])
+            cylinder(d= srew_hole_size ,h=height + va);
+
+        translate([radiator_base_support_thread_2_x,radiator_base_support_middle_width,van])
+            cylinder(d= srew_hole_size ,h=height + va);
+    }
+}
+
+module amplifer_lid()
 {
-   
 
+    difference()
+    {
+        cube(size = [amplifier_base_lenght,amplifier_base_width,amplifier_lid_height]);
+        
+        translate([amplifier_base_mounting_screw_offset, amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_lid_height + va);
+        translate([amplifier_base_mounting_screw_offset, amplifier_base_width - amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_lid_height + va);
+        translate([amplifier_base_lenght - amplifier_base_mounting_screw_offset, amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_lid_height + va);
+        translate([amplifier_base_lenght - amplifier_base_mounting_screw_offset, amplifier_base_width - amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_lid_height + va);
+
+        translate([amplifier_base_raditor_wall_hole_offset_x, amplifier_base_mounting_screw_offset, van])
+            cylinder(d= m3_hole ,h=amplifier_lid_height + va);
+        
+        translate([pos_opamp_from_frist_mounting_hole_x - radiator_base_width, radiator_total_height + lid_radiator_tollerance,radiator_base_lenght/2])
+            rotate([90,90,0])
+                radiator();
+        
+        translate([pos_opamp_from_frist_mounting_hole_x - radiator_base_width - lid_radiator_tollerance, radiator_total_height + lid_radiator_tollerance,radiator_base_lenght/2])
+            rotate([90,90,0])
+                radiator();
+
+        translate([pos_opamp_from_frist_mounting_hole_x - radiator_base_width + lid_radiator_tollerance, radiator_total_height + lid_radiator_tollerance,radiator_base_lenght/2])
+            rotate([90,90,0])
+                radiator();
+
+        translate([pos_opamp_from_frist_mounting_hole_x - radiator_base_width -lid_radiator_tollerance ,radiator_total_height,radiator_base_lenght/2])
+            rotate([90,90,0])
+                radiator();
+
+        translate([pos_opamp_from_frist_mounting_hole_x - radiator_base_width +lid_radiator_tollerance ,radiator_total_height,radiator_base_lenght/2])
+            rotate([90,90,0])
+                radiator();
+
+
+
+        translate([pos_opamp_from_frist_mounting_hole_x - radiator_base_width,radiator_total_height,radiator_base_lenght/2])
+            rotate([90,90,0])
+                radiator();
+    }
+}
+
+
+module srewHolder()
+{
     difference()
     {
         hull()
@@ -157,7 +325,10 @@ module srewHolder()
             translate([0,0,mounting_base_lenght])
                 cylinder(d=mounting_col_dia,h=0.1);
         }
+        
         cylinder(d=m3_thread,h=mounting_col_screw_depth);
+            translate([0,0,van])
+                cylinder(d=m3_thread,h=va);
              
     }
 
@@ -167,14 +338,17 @@ module srewHolder()
         
         translate([0,0,mounting_col_screw_offset])
             cylinder(d=m3_thread,h=mounting_col_screw_depth);
-        cylinder(d=m3_thread,h=mounting_col_screw_depth);
+                translate([0,0,mounting_col_height+van])
-        translate([0,0,mounting_col_screw_depth+(m3_thread-1.5)/2])cylinder(h=m3_thread-1.5, d1=m3_thread, d2=0, center = true);
+                    cylinder(d=m3_thread,h=va);
-    }
 
-    
 
+        cylinder(d=m3_thread,h=mounting_col_screw_depth);
+            translate([0,0,van])
+                cylinder(d=m3_thread,h=va);
 
-    
+        translate([0,0,mounting_col_screw_depth+(m3_thread-1.5)/2])
+            cylinder(h=m3_thread-1.5, d1=m3_thread, d2=0, center = true);
+    }
 }
 
 module radiator()
@@ -182,18 +356,80 @@ module radiator()
     color(Brass)
         translate([radiator_copper_offset_x,radiator_copper_offset_y,0])
             cube(size = [radiator_copper_lenght,radiator_copper_lenght,radiator_copper_height]);
-        
+    
+    color(Aluminum)translate([radiator_base_offset_x,radiator_base_offset_y,radiator_copper_height])
+            cube(size = [radiator_base_lenght,radiator_base_width,radiator_base_height]);
+
     color(Aluminum)hull()
     {
-        translate([radiator_base_offset_x,radiator_base_offset_y,radiator_copper_height])
+        translate([radiator_base_offset_x,radiator_base_offset_y,radiator_copper_height+radiator_base_height])
-            cube(size = [radiator_base_lenght,radiator_base_width,radiator_base_height]);
+            cube(size = [radiator_base_lenght,radiator_base_width,0.5]);
-        translate([0,0,radiator_copper_height+radiator_top_height])
+        translate([0,0,radiator_copper_height+radiator_full_height-1])
             cube(size = [radiator_base_lenght,radiator_full_width,1]);
     }
 }
 
 
 
+module amplifier_base_foot()
+{
+    difference()
+    {
+        hull()
+        {
+            translate([0,0,0.5])
+            cube(size = [amplifier_base_foot_bot_width,amplifier_base_foot_bot_width,1], center = true);
+
+            translate([0,0,amplifier_base_foot_height-1+0.5])
+                cube(size = [amplifier_base_foot_top_width,amplifier_base_foot_top_width,1], center = true);
+        }
+        translate([0,0,van])
+            cylinder(d=m3_hole,h=amplifier_base_foot_height+va);
+
+        translate([0,0,amplifier_base_foot_height - m3_head_height+van])
+            cylinder(d=m3_head_dia,h=m3_head_height+va);
+    }
+}
+
+//neutrik_xlr();
+module neutrik_xlr()
+{
+
+  
+     color("grey")cylinder(d=neutrik_xlr_front_dia,h=neutrik_xlr_front_depth);
+
+    difference()
+    {
+        color(BlackPaint)hull()
+        {
+            translate([neutrik_xlr_srew_sapcing/2,neutrik_xlr_srew_sapcing/2,neutrik_xlr_srew_holder_depth_offset])
+                cylinder(d=neutrik_xlr_srew_holder_dia,h=neutrik_xlr_srew_holder_depth);
+
+            translate([-neutrik_xlr_srew_sapcing/2,-neutrik_xlr_srew_sapcing/2,neutrik_xlr_srew_holder_depth_offset])
+                cylinder(d=neutrik_xlr_srew_holder_dia,h=neutrik_xlr_srew_holder_depth);
+
+            translate([0,0,neutrik_xlr_srew_holder_depth_offset])
+                cylinder(d=neutrik_xlr_front_dia,h=neutrik_xlr_srew_holder_depth);
+
+            translate([neutrik_xlr_front_dia/2,-neutrik_xlr_support_width/2,-neutrik_xlr_srew_holder_depth])
+                cube(size = [neutrik_xlr_support_offset_y,neutrik_xlr_support_width,neutrik_xlr_srew_holder_depth]);
+        }
+
+        translate([neutrik_xlr_srew_sapcing/2,neutrik_xlr_srew_sapcing/2,neutrik_xlr_srew_holder_depth_offset+van])
+                cylinder(d=m3_thread,h=neutrik_xlr_srew_holder_depth+va);
+
+            translate([-neutrik_xlr_srew_sapcing/2,-neutrik_xlr_srew_sapcing/2,neutrik_xlr_srew_holder_depth_offset+van])
+                cylinder(d=m3_thread,h=neutrik_xlr_srew_holder_depth+va);
+    }
+
+    translate([0,0,-neutrik_xlr_rear_depth])
+            cylinder(d=neutrik_xlr_front_dia,h=neutrik_xlr_rear_depth);    
+
+   color(BlackPaint) translate([neutrik_xlr_front_dia/2,-neutrik_xlr_support_width/2,-neutrik_xlr_rear_depth])
+            cube(size = [neutrik_xlr_support_offset_y,neutrik_xlr_support_width,neutrik_xlr_rear_depth]);
+
+}
+
 module neutrik_nl2()
 {
     color(BlackPaint)
@@ -261,9 +497,78 @@ module amplifier_full()
 {
     amplifer_base();
 
-    translate([pos_opamp_from_frist_mounting_hole_x,pos_opamp_from_frist_mounting_hole_y-mounting_col_dia/2-amplifier_pcb_srew_offset_y/2,0])
+    translate([amplifier_mounting_srew_offset_x, amplifier_mounting_srew_offset_y, amplifier_base_height])
-        rotate([90,270,0])
+        srewHolder();
+    translate([amplifier_mounting_srew_offset_x + amplifier_pcb_srew_sapcing_x , amplifier_mounting_srew_offset_y, amplifier_base_height])
+        srewHolder();
+    translate([amplifier_mounting_srew_offset_x, amplifier_mounting_srew_offset_y + amplifier_pcb_srew_sapcing_y , amplifier_base_height])
+        srewHolder();
+    translate([amplifier_mounting_srew_offset_x + amplifier_pcb_srew_sapcing_x, amplifier_mounting_srew_offset_y + amplifier_pcb_srew_sapcing_y, amplifier_base_height])
+        srewHolder();
+
+    color("blue")
+        translate([amplifier_base_raditor_base_offset_x,amplifier_base_raditor_base_offset_y,amplifier_base_height])
+            radiator_base_support(amplifier_base_radiator_mount_height, m3_thread);
+
+    translate([amplifier_mounting_srew_offset_x-amplifier_pcb_srew_offset_x,amplifier_mounting_srew_offset_y-amplifier_pcb_srew_offset_y,amplifier_base_height+mounting_col_height])
+        amplifierPcb();
+
+    translate([pos_opamp_from_frist_mounting_hole_x - radiator_base_width ,radiator_total_height,radiator_base_lenght+amplifier_base_height + amplifier_base_radiator_mount_height])
+        rotate([90,90,0])
             radiator();
-    translate([amplifier_mounting_srew_offset_x-amplifier_pcb_srew_offset_x,amplifier_mounting_srew_offset_y-amplifier_pcb_srew_offset_y,amplifier_base_height+mounting_col_height])amplifierPcb();
 
+    color("gray")
+        translate([amplifier_wall_screw_offset, amplifier_wall_screw_offset, amplifier_base_height])
+            amplifierWallMount();
+
+    color("gray")
+        translate([amplifier_base_lenght - amplifier_wall_screw_offset - amplifier_wall_mount_width , amplifier_wall_screw_offset, amplifier_base_height])
+            amplifierWallMount();
+
+    color("gray")
+        translate([amplifier_base_raditor_wall_hole_offset_x-amplifier_wall_screw_offset, amplifier_wall_screw_offset, amplifier_base_height])
+            amplifierWallMount();
+
+    color("gray")
+        translate([amplifier_wall_screw_offset, amplifier_base_width - amplifier_wall_screw_offset - amplifier_wall_mount_width , amplifier_base_height])
+            amplifierWallMount();
+
+    color("gray")
+        translate([amplifier_base_lenght - amplifier_wall_screw_offset - amplifier_wall_mount_width , amplifier_base_width - amplifier_wall_screw_offset - amplifier_wall_mount_width, amplifier_base_height])
+            amplifierWallMount();
+
+    color("black")
+        translate([amplifier_base_mounting_screw_offset, amplifier_base_mounting_screw_offset, 0])
+            rotate([180,0,0])
+                amplifier_base_foot();
+
+    color("black")
+        translate([amplifier_base_mounting_screw_offset, amplifier_base_width - amplifier_base_mounting_screw_offset, 0])
+            rotate([180,0,0])
+                amplifier_base_foot();
+
+    color("black")
+        translate([amplifier_base_lenght - amplifier_base_mounting_screw_offset, amplifier_base_mounting_screw_offset, 0])
+            rotate([180,0,0])
+                amplifier_base_foot();
+
+    color("black")
+        translate([amplifier_base_lenght - amplifier_base_mounting_screw_offset, amplifier_base_width - amplifier_base_mounting_screw_offset, 0])
+            rotate([180,0,0])
+                amplifier_base_foot();
+
+ translate([0,amplifier_mounting_srew_offset_y + amplifier_pcb_srew_sapcing_y, amplifier_wall_height - radiator_top_height/2])
+        rotate([90,0,270])
+            neutrik_nl2();
+
+    translate([amplifier_base_lenght ,amplifier_mounting_srew_offset_y + amplifier_pcb_srew_sapcing_y, amplifier_wall_height - radiator_top_height/2])
+        rotate([90,0,90])
+            neutrik_nl2();
+
+ translate([0,amplifier_base_width/2,amplifier_base_height+neutrik_xlr_support_offset_y+neutrik_xlr_front_dia/2 + 1 ])
+        rotate([90,90,270])
+            neutrik_xlr();
+
+    translate([0,0,amplifier_base_height + amplifier_wall_height ])
+        amplifer_lid(); 
 }

library/box.scad

@@ -209,3 +209,13 @@ module keyCubeEmptyWithResses(x,y,z,t,r1,r2,rsHeigh,rsWidth,rsRad,tFlat = false,
 	}
 }
 
+module keyPolyRounded(a=[0,0,0],b=[1,0,0],c=[1,1,0],d=[0,1,0],height=1,rad=1)
+{
+    hull()
+    {
+        translate([a[0]+rad,a[1]+rad,a[2]])cylinder(r=rad, h=height);
+        translate([b[0]-rad,b[1]+rad,b[2]])cylinder(r=rad, h=height);
+        translate([c[0]-rad,c[1]-rad,c[2]])cylinder(r=rad, h=height);
+        translate([d[0]+rad,d[1]-rad,d[2]])cylinder(r=rad, h=height);
+    }
+}