working compilation and programming process for stm both with main.c or main.cpp

ked/CMakeLists.txt

@@ -42,7 +42,7 @@ message("${Blue} |--> Libs used\t\t: ${EXTRA_LIBS} ${ColourReset}")
 ####################################################################################################
 #EXECUTABLE
 ####################################################################################################
-add_executable(${EXECUTABLE} ../main.cpp)
+add_executable(${EXECUTABLE} ../main.c)
 target_compile_options(${EXECUTABLE} PRIVATE ${MAIN_FLAGS})
 target_compile_definitions(${EXECUTABLE} PRIVATE ${MAIN_DEFS})
 target_include_directories(${EXECUTABLE} PUBLIC ${MAIN_INCLUDES})

ked/run.sh

@@ -44,7 +44,7 @@ else
 		echo -e "\e[32m"
 	fi
 
-	if [ "$CSL_TO_USE" == "nucleo_f042k6" ];then	
+	if [ "$CSL_TO_USE" == "stm32f042" ];then	
 		echo -e "\e[36m"
 		echo "+--------------------------------------+"
 		echo -e "\tFlashing $CSL_TO_USE" 

main.c

@@ -5,22 +5,53 @@
 #include "ascii.h"
 #include "timer.h"
 
-int main(int argc, char *argv[])
+void timer_test(timerNo_t timer, pinNo_t pin)
 {
-	uint8_t i = 0; 
-	uint8_t a = '0';
-	
-	delayInitMs(8000000, 1000); 
 	
-	timerActivateBus(timer_2); 
+	timerInitCounter(timer, 4000, 999, downCounting); 
-	timerSetPrescaler(timer_2,159999); 
+	timerSart(timer);
-	timerSetAutoReload(timer_2,999999); 
+
-	timerClearCounter(timer_2);
+	for(int i = 0; i < 10 ; i++)
-	timerEnableTimer(timer_2);
+	{
+		while(!timerGetUpdateInterrupt(timer));
+		timerClearUpdateInterrupt(timer);
+		pinToggle(pin);
+	}
+		pinWrite(pin,0);
+}
+
+void timer_capture_compare_test(timerNo_t timer)
+{
+	uint16_t i = 0;
+	timerInitCounter(timer, 100, 99, downCounting); 
+	// We use pin PA3 (Arduino header A2)
+	//timerInitOutputCompare(timer, toggle, 4, pinA3, 2,0, 300);
+	timerInitOutputCompare(timer, pwm_normal, 2, pinB3, 2,0, 900);
+	timerSart(timer);
+
+	while(1){
+		delayMs(200);
+		timerSetCounterCompareValue(timer, 2, i);
+		i += 10;
+		if(i>99) i = 0;
+	}
+}
+
+
+int main(int argc, char *argv[])
+{
+	uint8_t i = 0;
+	// making array with all available timers	
+	timerNo_t timers[MAX_TIMER_CHANNEL_COUNT] = {timer_1, timer_2, timer_3, timer_14, timer_16, timer_17}; 
+
 
+	delayInitMs(8000000, 1000); // Clock Freq and Divider for ARM library 
+
+	
 	pinConfig(pinB3, output, pushPull, def_res, def_speed);
 	pinConfig(pinA0, input, def_stage, pullDown, def_speed);	
-
+	
+	setupInit(); // This is the sescond call of System init the assebly start code is calling it before the main.	
 	usartInit(	usart2, 
 				pinA2, 
 				pinA15,
@@ -31,7 +62,7 @@ int main(int argc, char *argv[])
 
 	//clears screen and send the wellcome messgae
 	print_Usart(usart2, ASCII_clear); 
-	print_Usart(usart2, "Wellcome to our KED project\n\r"); 
+	print_Usart(usart2, "HEllooo to our KED project\n\r"); 
 	
 
 	//blinks 10 times to indicate the sicsessfull init if the device
@@ -43,36 +74,15 @@ int main(int argc, char *argv[])
 	}
 	
 	pinWrite(pinB3,0);
-	
+
+	timer_capture_compare_test(timer_2);
+	print_Usart(usart2, "All is working fine \r\n"); 
+
 	while(1)
 	{
-		while(!(TIM2->SR & 1));
-		TIM2->SR &=~ 1;
-		pinToggle(pinB3);
-		/*
-		//USART will rteturn what wou type and trun led on if you press "1"
-		a =	usartGetChar(usart2); 
-		usartSendChar(usart2, a);			
-		if(a == '1')
-		{
-			pinWrite(pinB3,1);
-		}
-		else 
-		{
-			pinWrite(pinB3,0);
-		}	
-
-		//test if the gpio port works as an input
-		if(pinRead(pinA0))
-		{
-			pinWrite(pinB3,1);
-		}
-		else 
-		{
-			pinWrite(pinB3,0);
-		}
-		delayMs(10); 
-		*/
 	}
+	
 	return 1;
 }
+
+

main.cpp

@@ -76,7 +76,7 @@ int main(int argc, char *argv[])
 	pinWrite(pinB3,0);
 
 
-	timer_capture_compare_test(timer_2);
+	//timer_capture_compare_test(timer_2);
 	print_Usart(usart2, const_cast<char *>("All is working fine \r\n")); 
 
 	while(1)