Automated the project configuration file. I need now to moove all the auto include funtions in one file

CMakeLists.txt

@@ -1,10 +1,9 @@
 cmake_minimum_required(VERSION 3.15)
 
-
 ####################################################################################################
 # CMAKE Features
 ####################################################################################################
-set(CMAKE_VERBOSE_MAKEFILE off)		#Should CMake print everythign ?
+set(CMAKE_VERBOSE_MAKEFILE ON)		#Should CMake print everythign ?
 set(OUTPUT_DOXYGEN FALSE)			#Should CMake generate Doxygen output ? 
 
 
@@ -21,7 +20,7 @@ set(PERIFERALS_DIR ${CMAKE_SOURCE_DIR}/periferals)		#Directory fot the written -
 #INCLUDES
 ####################################################################################################
 include(config/cmakeProjectConfig.cmake)				#For the moment there are only colors
-include(${PROJECT_DIR}/project.conf)	#Here is the include Where the user sould define his project sources and headers
+include(${PROJECT_DIR}/projectDefinitions.cmake)	#Here is the include Where the user sould define his project sources and headers
 
 ####################################################################################################
 # Cheking if the choosen CSL exists, this i redundant because run.sh makes that alredy but makes the 
@@ -68,7 +67,7 @@ set(STARTUP_UCODE sub::startup)
 ####################################################################################################
 set(PERIPHERALS_LIST deviceSetup delay usart timer spi i2c pin)
 
-set(NEW_ELEMENT null)
+set(NEW_PERIPHERAL null)
 
 message("${BoldYellow}")
 message("+-------------------------------+")
@@ -76,8 +75,8 @@ message("Cheking Periferals")
 message("+-------------------------------+")
 
 foreach(X IN LISTS PERIPHERALS_LIST)	
-	addPeripheral("${X}" "NEW_ELEMENT")
+	addPeripheral("${X}" "NEW_PERIPHERAL")
-	list(APPEND PERIPHERAL_LIBS ${NEW_ELEMENT})
+	list(APPEND PERIPHERAL_LIBS ${NEW_PERIPHERAL})
 endforeach()
 
 message("+-------------------------------+")
@@ -101,11 +100,44 @@ endforeach()
 message("+-------------------------------+")
 message("${ColourReset}")
 
+####################################################################################################
+#User's project definitions
+####################################################################################################
+message("${BoldYellow}")
+message("+-------------------------------+")
+message("Cheking User's Project")
+message("+-------------------------------+")
+message("Declared Project Headers :")
+foreach(X IN LISTS PROJECT_HEADERS_DIR)	
+	message("|-->${X}")
+endforeach()
+message("Included Project Headers :")
+projectHeadersCheck()
+
+message("Decalred Project Sources :")
+foreach(X IN LISTS PROJECT_SOURCES_DIR)	
+	message("|-->${X}")
+endforeach()
+message("Included Project Sources :")
+projectCheckSourcesCheck()
+
+message("Declared sources :")
+foreach(X IN LISTS PROJECT_SOURCES_DIR_LIST)	
+	message("|-->${X}")
+endforeach()
+
+message("Creating Libraries for declared sources :")
+foreach(X IN LISTS PROJECT_SOURCES_DIR_LIST)	
+	projectAddItem("${X}" "NEW_PROJECT_ITEM")
+	list(APPEND PROJECT_LIBS ${NEW_PROJECT_ITEM})
+endforeach()
+
+message("+-------------------------------+")
 
 ####################################################################################################
 #Stick All the libraries together, only for code redability futher down.
 ####################################################################################################
-foreach(X IN LISTS STARTUP_UCODE PERIPHERAL_LIBS DRIVER_LIBS)
+foreach(X IN LISTS STARTUP_UCODE PROJECT_LIBS PERIPHERAL_LIBS DRIVER_LIBS )
 	list(APPEND GENERATED_LIBRARIES ${X}) 
 endforeach()
 
@@ -139,12 +171,15 @@ foreach(X IN LISTS DRIVERS_LIST)
 	message("   |->${X}")
 endforeach()
 
-message(" |--> Generated Library Submodules ${Magenta}!!!This list order also defines the compilation order of submodules!!!${ColourReset}")
+message(" |--> Project sources to be implemented:") 
-message("${BoldBlue}")
+foreach(X IN LISTS PROJECT_SOURCES_DIR_LIST)	
-foreach(X IN LISTS GENERATED_LIBRARIES)	
 	message("   |->${X}")
 endforeach()
 
+message(" |--> Generated Library Submodules ${Magenta}!!!This list order also defines the compilation order of submodules!!!${ColourReset}${BoldBlue}")
+foreach(X IN LISTS GENERATED_LIBRARIES)	
+	message("   |->${X}")
+endforeach()
 message("+-------------------------------+")
 message("${ColourReset}")
 
@@ -154,7 +189,7 @@ message("${ColourReset}")
 add_executable(${EXECUTABLE} ${PROJECT_DIR}/main.c)
 target_compile_options(${EXECUTABLE} PRIVATE ${MAIN_FLAGS})
 target_compile_definitions(${EXECUTABLE} PRIVATE ${MAIN_DEFS})
-target_include_directories(${EXECUTABLE} PUBLIC ${PROJEC_HEADERS} ${PROJECT_SOURCES} ${MAIN_INCLUDES})
+target_include_directories(${EXECUTABLE} PUBLIC ${PROJECT_HEADERS_DIR} ${PROJECT_SOURCES_DIR} ${MAIN_INCLUDES})
 
 ####################################################################################################
 #LINKING EXECUTEABLE

csl/stm32f042/Src/imp_deviceSetup.c

@@ -1,4 +1,4 @@
-#include"deviceSetup.h"
+#include "deviceSetup.h"
 #include "stm32f042x6.h"
 
 

drivers/CMakeLists.txt

@@ -1,5 +1,3 @@
-add_subdirectory(max31865)
-
 function(addDriver alias _currentDriver)	
 	if(EXISTS ${DRIVERS_DIR}/${alias} )    # Checks if the desired peripheral is implemented for the desired CSL.
 		message(" --> Driver directory : ${DRIVERS_DIR}/${alias} = FOUND")

examples/autoInit/headers/uartComm.h

@@ -0,0 +1,17 @@
+#ifndef UART_COMM_H
+#define UART_COMM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+		
+void uartCommInit();
+void uartCommPrintWellcome();
+void uartCommPrintSensorActivate();
+void uartCommPrintSensorDeActivate();
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* UART_COMM_H */

examples/autoInit/main.c

@@ -1,33 +1,22 @@
 #include "main.h"
 #include "delay.h"
+#include "pin.h"
 #include "deviceSetup.h"
-#include "usart.h"
+#include "uartComm.h"
-#include "ascii.h"
+#include "sensor.h"
 
 int main(int argc, char *argv[])
 {
 	uint8_t i = 0;
-	
+
 	delayInitMs(8000000, 1000); // Clock Freq and Divider for ARM library 
 	
 	pinConfig(pinB3, output, pushPull, def_res, def_speed);
 	pinConfig(pinA0, input, def_stage, pullDown, def_speed);	
 	
 	setupInit(); // This is the sescond call of System init the assebly start code is calling it before the main.	
-	
-	usartInit(	usart2, 
-				pinA2, 
-				pinA15,
-				115200,
-				eight, 
-				NO_PARITY_CTRL,
-				noFlowControl); 
-
-	//clears screen and send the wellcome messgae
-	print_Usart(usart2, ASCII_clear); 
-	print_Usart(usart2, "Hello to our KED project\n\r"); 
-	
 
+	uartCommInit();
 	//blinks 10 times to indicate the sicsessfull init if the device
 	for(i = 0 ; i < 2 ; i++) {
 		delayMs(100); 
@@ -35,13 +24,9 @@ int main(int argc, char *argv[])
 		delayMs(100); 
 	}
 
-	pinWrite(pinB3,0);
+	uartCommPrintWellcome();	
-
+	sensorActivate(1);
-	print_Usart(usart2, "\n\r"); 
+	sensorActivate(0);
-	
-	print_Usart(usart2, "\n\r"); 
-	print_Usart(usart2, "\n\r"); 
-	print_Usart(usart2, "All is working fine\n\r"); 
 	
 	while(1)
 	{

examples/autoInit/projectDefinitions.cmake

@@ -0,0 +1,62 @@
+#Declareing header directory for the project
+#To add a new directory 
+# -> list(APPEND PROJECT_HEADERS_DIR ${PROJECT_DIR}/YOUR_DESIRED_DIRECTORY)	
+# list()				= List declaration "DON'T CHANGE"
+# PROJECT_HEADERS_DIR	= Variable containing the listed direcotries "DON'T CHANCE
+# ${PROJECT_DIR}		= Direcotry of the main project this is per default the current direcotry it is defined in ked/CMakeLists.txt 
+list(APPEND PROJECT_HEADERS_DIR ${PROJECT_DIR}/headers)	
+
+#Declaring sources directory for the project
+#To add a new directory 
+# -> list(APPEND PROJECT_SOURCES_DIR ${PROJECT_DIR}/YOUR_DESIRED_DIRECTORY)	
+# list()				= List declaration "DON'T CHANGE"
+# PROJECT_SOURCES_DIR	= Variable containing the listed direcotries "DON'T CHANCE
+# ${PROJECT_DIR}		= Direcotry of the main project this is per default the current direcotry it is defined in ked/CMakeLists.txt 
+list(APPEND PROJECT_SOURCES_DIR ${PROJECT_DIR}/src)
+list(APPEND PROJECT_SOURCES_DIR ${PROJECT_DIR}/sensors)
+
+#Declaring sources to be compiled for the project. 
+#CMake will look in each previsouly declarec sources directory until to find this files. 
+set(PROJECT_SOURCES_DIR_LIST uartComm.c sensor.c)
+
+#Searching if the given header directory exists if not we brake the compilation
+function(projectHeadersCheck)
+	foreach(X IN LISTS PROJECT_HEADERS_DIR)	
+		if(EXISTS ${X})
+			message("|--> ${X} : INCLUDED") 	
+		else()
+			message(FATAL_ERROR "Header directory ${X} : NOT FOUND") 	
+		endif()
+	endforeach()
+endfunction()
+
+#Searching if the given Source exists if not we brake the compilation
+function(projectCheckSourcesCheck)
+	foreach(X IN LISTS PROJECT_SOURCES_DIR)	
+		if(EXISTS ${X})
+			message("|--> ${X} : INCLUDED") 	
+		else()
+			message(FATAL_ERROR "Source directory ${X} : NOT FOUND") 	
+		endif()
+	endforeach()
+endfunction()
+
+#Searching each sources directory to find the desired source file and generate a libaray submodule for the linker
+function(projectAddItem	alias _currentItem)	
+	foreach(X IN LISTS PROJECT_SOURCES_DIR)	
+		if(EXISTS ${X})
+			if(EXISTS ${X}/${alias}) #For each directory we chanek if the given source file exitst
+				message("|-->${alias} FOUND in : ${X}")
+				message(" |-> Creating sub::${alias} library submodule")
+				add_library(${alias}_submodule ${X}/${alias})
+				target_compile_options(${alias}_submodule PRIVATE ${C_FLAGS})
+				target_compile_definitions(${alias}_submodule PRIVATE ${C_DEFS})
+				target_include_directories(${alias}_submodule PUBLIC ${PROJECT_HEADERS_DIR} ${PERIFERALS_DIR} ${CSL_INCLUDES})
+				add_library(sub::${alias} ALIAS ${alias}_submodule)
+				set(${_currentItem} sub::${alias} PARENT_SCOPE)
+			endif()
+		else()
+			message(FATAL_ERROR "Source directory ${X} : NOT FOUND") 	
+		endif()
+	endforeach()
+endfunction()

examples/autoInit/sensors/sensor.c

@@ -0,0 +1,14 @@
+#include "sensor.h"
+
+void sensorActivate(uint8_t activate)
+{
+	if(activate == 1)
+	{
+		uartCommPrintSensorActivate();
+	}
+	else
+	{
+		uartCommPrintSensorDeActivate();
+	}
+}
+

examples/autoInit/sensors/sensor.h

@@ -0,0 +1,14 @@
+#ifndef SENSOR_H
+#define SENSOR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#include <stdint.h>
+#include "uartComm.h"
+void sensorActivate(uint8_t activate);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SENSOR_H */

examples/autoInit/src/uartComm.c

@@ -0,0 +1,32 @@
+#include "usart.h"
+#include "ascii.h"
+#include "pin.h"
+
+void uartCommInit()
+{
+	usartInit(	usart2, 
+				pinA2, 
+				pinA15,
+				115200,
+				eight, 
+				NO_PARITY_CTRL,
+				noFlowControl); 
+}
+
+void uartCommPrintWellcome()
+{
+	print_Usart(usart2, ASCII_clear); 
+	print_Usart(usart2, "Hello to our KED project\n\r"); 	
+
+	print_Usart(usart2, "\n\r"); 
+	print_Usart(usart2, "All is working fine\n\r"); 
+}
+void uartCommPrintSensorDeActivate()
+{
+	print_Usart(usart2, "Sensor De-Activated\n\r"); 	
+}
+void uartCommPrintSensorActivate()
+{
+	print_Usart(usart2, "Sensor Activated\n\r"); 	
+}
+

examples/oldInit/main.c

@@ -0,0 +1,55 @@
+#include "main.h"
+#include "delay.h"
+#include "deviceSetup.h"
+#include "usart.h"
+#include "ascii.h"
+
+int main(int argc, char *argv[])
+{
+	uint8_t i = 0;
+	
+	delayInitMs(8000000, 1000); // Clock Freq and Divider for ARM library 
+	
+	pinConfig(pinB3, output, pushPull, def_res, def_speed);
+	pinConfig(pinA0, input, def_stage, pullDown, def_speed);	
+	
+	setupInit(); // This is the sescond call of System init the assebly start code is calling it before the main.	
+	
+	usartInit(	usart2, 
+				pinA2, 
+				pinA15,
+				115200,
+				eight, 
+				NO_PARITY_CTRL,
+				noFlowControl); 
+
+	//clears screen and send the wellcome messgae
+	print_Usart(usart2, ASCII_clear); 
+	print_Usart(usart2, "Hello to our KED project\n\r"); 
+	
+
+	//blinks 10 times to indicate the sicsessfull init if the device
+	for(i = 0 ; i < 2 ; i++) {
+		delayMs(100); 
+		pinToggle(pinB3);
+		delayMs(100); 
+	}
+
+	pinWrite(pinB3,0);
+
+	print_Usart(usart2, "\n\r"); 
+	
+	print_Usart(usart2, "\n\r"); 
+	print_Usart(usart2, "\n\r"); 
+	print_Usart(usart2, "All is working fine\n\r"); 
+	
+	while(1)
+	{
+		delayMs(100); 
+		pinToggle(pinB3);
+		delayMs(100); 
+	}
+	
+	return 1;
+}
+

examples/oldInit/main.h

@@ -0,0 +1,12 @@
+#ifndef MAIN_H
+#define MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MAIN_H */

examples/oldInit/projectDefinitions.cmake

@@ -0,0 +1,62 @@
+#Declareing header directory for the project
+#To add a new directory 
+# -> list(APPEND PROJECT_HEADERS_DIR ${PROJECT_DIR}/YOUR_DESIRED_DIRECTORY)	
+# list()				= List declaration "DON'T CHANGE"
+# PROJECT_HEADERS_DIR	= Variable containing the listed direcotries "DON'T CHANCE
+# ${PROJECT_DIR}		= Direcotry of the main project this is per default the current direcotry it is defined in ked/CMakeLists.txt 
+list(APPEND PROJECT_HEADERS_DIR ${PROJECT_DIR}/headers)	
+
+#Declaring sources directory for the project
+#To add a new directory 
+# -> list(APPEND PROJECT_SOURCES_DIR ${PROJECT_DIR}/YOUR_DESIRED_DIRECTORY)	
+# list()				= List declaration "DON'T CHANGE"
+# PROJECT_SOURCES_DIR	= Variable containing the listed direcotries "DON'T CHANCE
+# ${PROJECT_DIR}		= Direcotry of the main project this is per default the current direcotry it is defined in ked/CMakeLists.txt 
+list(APPEND PROJECT_SOURCES_DIR ${PROJECT_DIR}/src)
+list(APPEND PROJECT_SOURCES_DIR ${PROJECT_DIR}/sensors)
+
+#Declaring sources to be compiled for the project. 
+#CMake will look in each previsouly declarec sources directory until to find this files. 
+set(PROJECT_SOURCES_DIR_LIST uartComm.c sensor.c)
+
+#Searching if the given header directory exists if not we brake the compilation
+function(projectHeadersCheck)
+	foreach(X IN LISTS PROJECT_HEADERS_DIR)	
+		if(EXISTS ${X})
+			message("|--> ${X} : INCLUDED") 	
+		else()
+			message(FATAL_ERROR "Header directory ${X} : NOT FOUND") 	
+		endif()
+	endforeach()
+endfunction()
+
+#Searching if the given Source exists if not we brake the compilation
+function(projectCheckSourcesCheck)
+	foreach(X IN LISTS PROJECT_SOURCES_DIR)	
+		if(EXISTS ${X})
+			message("|--> ${X} : INCLUDED") 	
+		else()
+			message(FATAL_ERROR "Source directory ${X} : NOT FOUND") 	
+		endif()
+	endforeach()
+endfunction()
+
+#Searching each sources directory to find the desired source file and generate a libaray submodule for the linker
+function(projectAddItem	alias _currentItem)	
+	foreach(X IN LISTS PROJECT_SOURCES_DIR)	
+		if(EXISTS ${X})
+			if(EXISTS ${X}/${alias}) #For each directory we chanek if the given source file exitst
+				message("|-->${alias} FOUND in : ${X}")
+				message(" |-> Creating sub::${alias} library submodule")
+				add_library(${alias}_submodule ${X}/${alias})
+				target_compile_options(${alias}_submodule PRIVATE ${C_FLAGS})
+				target_compile_definitions(${alias}_submodule PRIVATE ${C_DEFS})
+				target_include_directories(${alias}_submodule PUBLIC ${PROJECT_HEADERS_DIR} ${PERIFERALS_DIR} ${CSL_INCLUDES})
+				add_library(sub::${alias} ALIAS ${alias}_submodule)
+				set(${_currentItem} sub::${alias} PARENT_SCOPE)
+			endif()
+		else()
+			message(FATAL_ERROR "Source directory ${X} : NOT FOUND") 	
+		endif()
+	endforeach()
+endfunction()

run.sh

@@ -72,13 +72,8 @@ autoInit()
 			build
 	else
 		echo "Main.c is not fount"
-		echo "Creating sample project"
+		echo "Creating sample project"	
-		
+		cp -r $SCRIPT_DIR/examples/autoInit/* $PROJECT_DIR/
-		mkdir $PROJECT_DIR/headers
-		mkdir $PROJECT_DIR/src
-		cp $SCRIPT_DIR/examples/autoInit/main.h $PROJECT_DIR/headers
-		cp $SCRIPT_DIR/examples/autoInit/main.c $PROJECT_DIR/
-		cp $SCRIPT_DIR/examples/autoInit/project.conf $PROJECT_DIR/
 		build
 	fi
 }