#ifndef _BH1750_H_
#define _BH1750_H_

#include <iostream>
#include <array>
#include <string>
#include "../../periferals/i2c/i2c_ch1_pImpL.hpp"


//Start measurement at 4lx resolution. Time typically 16ms.
#define BH1750_CONTINUOUS_LOW_RES_MODE 0x13
//Start measurement at 1lx resolution. Time typically 120ms
#define BH1750_CONTINUOUS_HIGH_RES_MODE_1 0x10
//Start measurement at 0.5lx resolution. Time typically 120ms
#define BH1750_CONTINUOUS_HIGH_RES_MODE_2 0x11
//Start measurement at 1lx resolution. Time typically 120ms
//Device is automatically set to Power Down after measurement.
#define BH1750_ONE_TIME_HIGH_RES_MODE_1 0x20
//Start measurement at 0.5lx resolution. Time typically 120ms
//Device is automatically set to Power Down after measurement.
#define BH1750_ONE_TIME_HIGH_RES_MODE_2 0x21
//Start measurement at 1lx resolution. Time typically 120ms
//Device is automatically set to Power Down after measurement.
#define BH1750_ONE_TIME_LOW_RES_MODE 0x23

#define BH1750_POWER_DOWN  0x00 // No active state
#define BH1750_POWER_ON    0x01 // Power on
#define BH1750_RESET       0x07 // Reset data register value

#define BH1750_ADDR 0x23 // Device Adress 

class Bh1750
{
	public: 
		Bh1750(i2c_ch1_pImpL *i2c); 
		uint8_t sleep(); // To be testes
		uint8_t wake(); // To be tested
		uint8_t reset(); // To be tested 
		float oneShot(uint8_t mode); // ok  
		float continious(uint8_t mode, uint8_t delayMs); // IMplment delay or make a delay class ???
	private: 
		i2c_ch1_pImpL* i2c_bh1750;
		uint8_t high; 
		uint8_t low; 
		uint8_t currentMode; 
		uint8_t currentState; 
};

#endif // _BH1750_H_