#include "spi.h"

#define SPI_BASE	((SPI_TypeDef *)spiBase_Addr_List[spi_hw_ch])

// https://controllerstech.com/spi-using-registers-in-stm32/

void spi_initMater(spiCH_t_spi_hw_ch)
{
	RCC->APB2ENR |= (1<<12);  // Enable SPI1 CLock
	
	SPI1->CR1 |= (1<<0)|(1<<1);   // CPOL=1, CPHA=1
	
    SPI1->CR1 |= (1<<2);  // Master Mode
		
	SPI1->CR1 |= (3<<3);  // BR[2:0] = 011: fPCLK/16, PCLK2 = 80MHz, SPI clk = 5MHz
		
	SPI1->CR1 &= ~(1<<7);  // LSBFIRST = 0, MSB first
			
	SPI1->CR1 |= (1<<8) | (1<<9);  // SSM=1, SSi=1 -> Software Slave Management
			
	SPI1->CR1 &= ~(1<<10);  // RXONLY = 0, full-duplex
				
	SPI1->CR1 &= ~(1<<11);  // DFF=0, 8 bit data
				
	SPI1->CR2 = 0;
}

uint8_t spi_trx(spiCH_t_spi_hw_ch, uint8_t tx_data)
{
	// wait for SPY ready
	while((SPI_BASE->SR) & (1 << 7));

	// load tx data
	SPI_BASE->DR = tx_data;

	// Wait for RXNE flag to be set which indicates transmit complete
	while(!((SPI_BASE->SR) & (1<<0));
	
	return SPI_BASE->DR;
}