You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
122 lines
11 KiB
122 lines
11 KiB
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/strict.dtd">
|
|
<html lang="en">
|
|
<head>
|
|
<link rel="canonical" href="an003.htm" />
|
|
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
|
|
<meta name="Author" content="Rod Elliott - Elliott Sound Products">
|
|
<meta name="keywords" content="luxeon, star, led, regulator, switching, switchmode, analog, analogue, diy, circuit, schematic, diagram">
|
|
<meta name="description" content="ESP Application Notes - Simple High-Power LED Regulator">
|
|
<!-- ESP Application Notes - Simple High-Power LED Regulator -->
|
|
<title>Simple High-Power LED Regulator</title>
|
|
<link rel="StyleSheet" href="esp.css" type="text/css" media="screen, print">
|
|
<style TYPE="text/css"><!-- td { font-size: 11pt } --> </style>
|
|
<link rel="shortcut icon" type="image/ico" href="favicon.ico">
|
|
<script>
|
|
(adsbygoogle = window.adsbygoogle || []).push({
|
|
google_ad_client: "ca-pub-1947877433449191",
|
|
enable_page_level_ads: true
|
|
});
|
|
</script>
|
|
</head>
|
|
<body>
|
|
<table style="width:100%"><tr><td><img src="esp.jpg" alt="ESP Logo" height="81" width="215">
|
|
<td align="right">
|
|
|
|
<script async src="https://pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
|
|
<!-- 468x60, created 20/08/10 -->
|
|
<ins class="adsbygoogle"
|
|
style="display:inline-block;width:468px;height:60px"
|
|
data-ad-client="ca-pub-1947877433449191"
|
|
data-ad-slot="7119701939"></ins>
|
|
<script>
|
|
(adsbygoogle = window.adsbygoogle || []).push({});
|
|
</script>
|
|
|
|
</table>
|
|
|
|
<table style="width:100%" class="tblblue"><tr><td class="hdrl"> Elliott Sound Products</td>
|
|
<td align="right" class="hdrr">AN-003 </td></tr></table>
|
|
|
|
<center><h1>Simple High-Power LED Regulator</h1>
|
|
<small>Rod Elliott (ESP)</small></center>
|
|
|
|
<!-- AddThis Button BEGIN -->
|
|
<div class="addthis_inline_share_toolbox"></div>
|
|
<!-- AddThis Button END -->
|
|
|
|
<hr /><span class="imgswap"><a href="../index.html" style="display:block;"><img src="a1.gif" alt="Home"/><b class="bb">Main Index</b></a></span>
|
|
<span class="imgswap"><a href="index.html" style="display:block;"><img src="a1.gif" alt="app notes"/><b class="bb">App. Notes Index</b></a></span>
|
|
|
|
<hr /><b>High Power LEDs</b>
|
|
<p>There are quite a few high power light-emitting diodes now available, but the standard is still the Luxeon Star. Available in a variety of power ratings, colours and light patterns, these LEDs are causing something of a revolution in many areas. They have relatively low heat dissipation compared to light output, long life and there is great flexibility of use - they can be used safely where an incandescent lamp could not.</p>
|
|
|
|
<p>Being a LED, they do have the rather annoying trait of being a current driven device, having a relatively low forward voltage. The current must not be allowed to exceed the design maximum, or the LED will be damaged. This requires that a current regulator must be used between the voltage source and the LED itself, so complexity is increased compared to using a normal lamp.</p>
|
|
|
|
<hr /><b>LED Regulators</b>
|
|
<p>Although there are many ICs available that can be adapted to drive the Star LEDs (or their cheaper generic equivalents), not all are easy to obtain, many are available only in surface mount packages, and they can be rather expensive. Most also require external support components as well, increasing the price even further.</p>
|
|
|
|
<p>An alternative is to use a linear regulator, but these are very inefficient. The full current (typically around 300mA) is drawn at all supply voltages, so with 12V input, the total circuit dissipation is 3.6W. Admittedly, this is not a great deal, but where efficiency is paramount such as with battery operation, this is not a good solution. The circuit shown in Figure 1 was the result of a sudden brainwave on my part - it may have been triggered by something I saw somewhere, but if so that reference was well gone by the time I decided to simulate it to see if it would work.</p>
|
|
|
|
<p class="t-pic"><img src="an003-f1.gif" alt="Figure 1" border="1"><br>Figure 1 - Ultra-Simple LED Switchmode Supply</p>
|
|
|
|
<p>Using only three cheap transistors, the circuit works remarkably well. It is not as efficient as some of the dedicated ICs, but is far more efficient than a linear regulator. It has the great advantage that you can actually see what it does and how it does it. From the experimenters' perspective, this is probably one of its major benefits.</p>
|
|
|
|
<p>One of the features of this circuit is that it will change from switchmode to linear as the input voltage falls. It still remains a current supply, and the design current (set by R1) does not change appreciably as the operation changes from linear to switchmode or vice versa.</p>
|
|
|
|
<hr /><b>How Does It Work?</b>
|
|
<p>Operation is quite simple - Q1 monitors the voltage across R1, and turns on as soon as it reaches about 0.7V. This turns off Q2, which then turns off Q3 by removing base current. If the voltage is low, a state of equilibrium is reached where the voltage across R1 remains constant, and so therefore does the current through it (and likewise through the LED). The value of R1 can be changed to suit the maximum LED current ...
|
|
|
|
<blockquote>
|
|
<b> I = 0.7 / R1</b> (approx.)
|
|
</blockquote>
|
|
|
|
<p>At higher input voltages, the circuit will over-react. Because of the delay caused by the inductor, the voltage across R1 will manage to get above the threshold voltage by a small amount. Q3 will get to turn on hard, current flows through the inductor and into C1 and the LED. By this time, the transistors will have reacted to the high voltage across R1, so Q1 turns on, turning off Q2 and Q3. The magnetic field in L1 collapses, and the reverse voltage created causes current to flow through D1 and into C2. The cap now discharges through the LED and R1, until the voltage across R1 is such that Q1 turns off again. Q2 and Q3 then turn back on.</p>
|
|
|
|
<p>This cycle repeats for as long as power is applied at above the threshold needed for oscillation (a bit over 5V). As shown in the table below, the circuit changes its operating frequency as its method of changing the pulse width. This is not uncommon with self-oscillating switchmode supplies.</p>
|
|
|
|
<center><table style="width:700px" border="1">
|
|
<colgroup span="4" width="25%">
|
|
<tr class="tbldark"><td><b>Voltage</b></td><td><b>Current</b></td><td><b>Frequency</b></td><td><b>Input Power</b></td></tr>
|
|
<tr><td>4.5</td><td>260mA</td><td>Not Oscillating</td><td>1.17W</td></tr>
|
|
<tr><td>6.0</td><td>202mA</td><td>230kHz</td><td>1.21W</td></tr>
|
|
<tr><td>8.0</td><td>164mA</td><td>172kHz</td><td>1.31W</td></tr>
|
|
<tr><td>12</td><td>123mA</td><td>123kHz</td><td>1.48W</td></tr>
|
|
<tr><td>16</td><td>104mA</td><td>100kHz</td><td>1.66W</td></tr>
|
|
</table><b class="t-pic">Table 1 - Operating Characteristics</b></center>
|
|
|
|
<p>The table above shows the operating characteristic of the prototype. I also checked the performance with an ultrafast silicon diode, and the input operating current was increased by almost 10%. The suggested Schottky diode is well worth the effort. LED current remains fairly steady at 260mA, since I used a 2.7 ohm current sensing resistor as shown in the circuit diagram.</p>
|
|
|
|
<hr><b>Construction</b><br>
|
|
Construction is not critical, but a compact layout is recommended. L1 needs to be rated for the continuous LED current, Q1 does not need a heatsink, but one will do no harm. The ripple current rating for C2 needs to be at least equal to the LED current, so a higher voltage cap than you think you need should be used. I recommend that a minimum voltage rating of 25V be used for both C1 and C2.
|
|
|
|
<p>Q1 and Q2 can be any low power NPN transistor. BC549s are shown in the circuit, but most are quite fast enough in this application. Q3 needs to be a medium power device, and the BD140 as shown works well in practice. D1 should be a high speed diode, and a Schottky device will improve efficiency over a standard high speed silicon diode. D1 needs to be rated at a minimum of 1A. L1 is a 100µH choke, and will typically be either a small 'drum' core or a powdered iron toroid. An air cored coil can be used, but will be rather large (at least as big as the rest of the circuit).</p>
|
|
|
|
<p>The efficiency is not as high as you would get from a dedicated IC, because the switching losses are higher due to relatively slow transitions. At best, I measured around 60%, which isn't bad for such a simple circuit. Input voltage can range from the minimum to turn on the LED up to about 16V or so. Higher voltages may be acceptable, but that has not been tried at the time of writing.</p>
|
|
|
|
<p>All resistors can be 0.25 or 0.5W except R1 - this needs to be rated at 0.5W. Paralleled low value resistors may be used to get the exact current you need, but always make sure that you start with a higher resistance than you think you will need. If resistance is too low, the LED may be damaged by excess current.</p>
|
|
|
|
<hr />
|
|
<center>
|
|
<script async src="https://pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
|
|
<!-- 728x90 -->
|
|
<ins class="adsbygoogle"
|
|
style="display:inline-block;width:728px;height:90px"
|
|
data-ad-client="ca-pub-1947877433449191"
|
|
data-ad-slot="9701674198"></ins>
|
|
<script>
|
|
(adsbygoogle = window.adsbygoogle || []).push({});
|
|
</script>
|
|
</center>
|
|
|
|
<hr /><span class="imgswap"><a href="../index.html" style="display:block;"><img src="a1.gif" alt="Home"/><b class="bb">Main Index</b></a></span>
|
|
<span class="imgswap"><a href="index.html" style="display:block;"><img src="a1.gif" alt="app notes"/><b class="bb">App. Notes Index</b></a></span><br />
|
|
|
|
<table border="1" class="tblblk">
|
|
<tr><td class="t-wht"><a id="copyright"></a><b>Copyright Notice.</b>This article, including but not limited to all text and diagrams, is the intellectual property of Rod Elliott, and is © 2004. Reproduction or re-publication by any means whatsoever, whether electronic, mechanical or electro-mechanical, is strictly prohibited under International Copyright laws. The author (Rod Elliott) grants the reader the right to use this information for personal use only, and further allows that one (1) copy may be made for reference while constructing the project. Commercial use is prohibited without express written authorisation from Rod Elliott.</td></tr>
|
|
</table>
|
|
<div class="t-sml">Page Created and Copyright © Rod Elliott 02 Jun 2005</div><br />
|
|
|
|
<script type="text/javascript" src="https://s7.addthis.com/js/300/addthis_widget.js#pubid=ra-5cd8c929c555da1d"></script>
|
|
</body>
|
|
</html>
|